Сбой DNS-сервера 0x8007232A; ошибка активации корпоративных лицензий в Windows 10

Сбой DNS-сервера 0x8007232A – ошибка активации корпоративных лицензий в Windows 10.

Есть много ошибок, связанных с ошибкой активации тома Windows, когда такая ошибка является отказом DNS-сервера 0x8007232A. Обычно это происходит, когда компьютер не может найти сервер KMS в своей сети. Этот пост поможет вам решить эту проблему.

Сбой DNS сервера 0x8007232A

В отличие от ошибки 0x8007232B, сервер KMS действительно существует в сети, поэтому единственная проблема – это разрешение вашей сети. Проблема DNS означает, что компьютер не может связаться с сервером KMS с помощью URL-адреса сервера.

В зависимости от ситуации требуется ИТ-администратор.

1. Запустите Средство устранения неполадок сети

Я бы посоветовал вам запустить средство устранения неполадок сети, чтобы исправить проблемы, которые находятся на стороне ПК. Перейдите в раздел Настройки > Обновление и безопасность >> Устранение неполадок. Найдите следующее средство устранения неполадок и запустите его.

Но если вы чувствуете, что проблема может быть связана с ограничением, наложенным администратором на ваш компьютер, вам придется связаться со службой поддержки.

2. Разрешить службу управления ключами через Брандмауэр

Правило брандмауэра на компьютере может блокировать его. Если ваш компьютер позволяет настроить брандмауэр, вы можете выполнить поиск в меню Пуск и затем настроить его. Но если ваш компьютер не позволяет вам получить доступ к настройкам брандмауэра, свяжитесь с администратором, чтобы решить эту проблему.

Как только настройки будут изменены, закройте его и попробуйте активировать Windows.

3. Проверьте хост-сервер KMS для интернета

Возможно, что сам сервер имеет приглашение, и администратор может проверить, подключен ли хост-сервер KMS к интернету и работает ли он должным образом. Это может быть проверено и исправлено только ИТ-администратором. Вполне возможно, что служба KMS не работает, или у компьютера есть проблема с DNS или брандмауэром, который может ограничивать любые входящие запросы.

Я надеюсь, что сообщениям в статье было легко следовать, и вы смогли устранить сбой DNS – сервера 0x8007232A — ошибка активации тома. Если ваша учетная запись пользователя не имеет достаточных полномочий, лучше всего связаться с администратором, чтобы сделать это быстрее.

How to Fix Windows Activation Error 0x8007232b (Fixed)

Last night we got a call from Mr. Singal: “I did a clean install just to wipe everything. Afterward, it was activated for a couple of hours, but now it’s saying that it’s not activated anymore. When I try to activate it, I always get an Error code: 0x8007232B. Error Description: DNS name does not exist”. How do I fix it? So, today I am going to explain How to fix Windows Activation Error 0x8007232b.

Possible Error Message:

Error message 1:
Windows could not be activated.
Key management services (KMS) host could not be located in the domain name system (DNS), please have your system administrator verify that a KMS is published correctly in DNS.
Error: 0x8007232b
Description:
DNS name does not exist.

Error message 2:
Error: 0x8007007B
“The filename, directory name, or volume label syntax is incorrect”

How to fix Windows Activation Error 0x8007232b Solution 1:

Change the product key to a MAK. To do this, follow these steps:

1. Search CMD and run as an administrator.

Error code: 0x8007232B

2. At the command prompt, type the following command, and then press Enter:

NOTE: Placeholder xxxxx-xxxxx-xxxxx-xxxxx-xxxxx represents your MAK product key.

Once you are done with this, you should see this:

Error: 0x8007232b DNS name does not exist.

Just restart your computer and the problem should be resolved.

How to fix Windows Activation Error 0x8007232b Solution 2:

How to fix Windows Activation Error 0x8007232b Solution 3:

The client cannot locate a KMS host on the network for activation: If your network has a KMS host computer set up, and if the client cannot locate a KMS host on the network for activation, follow these steps:

1. Verify that the computer that has the KMS host installed and that is activated by using a KMS key is registered in DNS. To do this, follow these steps:

Open the KMS. txt file that is generated by the command. This file should contain one or more entries that resemble the following entry:

KMS host on the network for activation

If these “_vlmcs” entries are present, and if they contain the expected KMS hostnames, go to the “Solution 4” section.

2. By default, a KMS host server dynamically registers a DNS SRV record one time every 24 hours. Check the registry to determine whether the KMS host server is registering with DNS. To do this, follow these steps:

If the DNS Server service does not support dynamic updates, or if dynamic updates are not occurring, the “VLMCS._TCP, SRV” record may be manually registered. To manually create a KMS SRV record in a Microsoft DNS server, follow these steps:

To manually create SRV records in a BIND 9.x Compliant DNS server includes the following information when you create the record.

How to fix Windows Activation Error 0x8007232b Solution 4:

Manually assign a KMS server: By default, the KMS clients use the automatic discovery feature and query DNS for a list of servers that have published the _VLMCS record within the membership zone of the client. DNS returns the list of KMS hosts in random order. The client picks a KMS host and tries to establish a session on it. If this attempt works, the client caches the server and tries to use it for the next renewal attempt. If the session setup fails, the client picks another server randomly. We highly recommend that you use the automatic discovery feature. However, you can manually assign a KMS server. To do this, open an elevated command prompt on the KMS client.

Use the following commands from an elevated command prompt:

→ To assign a KMS host by using the FQDN of the host, type the following command:

→ To assign a KMS host by using the version 4 IP address of the host, type the following command:

→ To assign a KMS host by using the version 6 IP address of the host, type the following command:

→ To assign a KMS host by using the NETBIOS name of the host, type the following command:

→ To revert to automatic discovery on a KMS client, type the following command:

cscript \windows\system32\slmgr. vbs – ckms

This should resolve your problem with other Microsoft Error Code checks here. In case, you still can’t get rid of this problem, just create a FREE support ticket and our technical experts will resolve the issue within 24 hours, to get support click HERE

Live Chat With Us | Call 9088888835 | Book Your Repair Job Here.

Понравилась статья? Поделиться с друзьями:
Добавить комментарий

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: