Как исправить код ошибки Nintendo Switch 2110-2003

Некоторые пользователи Nintendo Switch сталкиваются с кодом ошибки 2110-2003 при попытке подключиться к своей домашней сети Wi-Fi. Этот конкретный диапазон кодов ошибок указывает на проблему, которая возникла до попытки вашей консоли получить IP-адрес.

После изучения этой конкретной проблемы выяснилось, что эта проблема может возникать по нескольким причинам. Вот краткий список потенциальных виновников, которые могут вызвать эту проблему:

Метод 1: выключите и снова включите консоль

По словам нескольких затронутых пользователей, этот конкретный код ошибки также может возникать из-за сбоя, вызванного временным файлом, который в настоящее время хранит ваша консоль. В этом случае вы сможете решить эту проблему, выполнив программный сброс.

Эта операция успешно очистит любые временные данные вместе с силовыми конденсаторами, гарантируя, что никакие временные данные не могут сохраниться между запусками и вызовут код ошибки 2110-2003.

Успешность этой операции была подтверждена несколькими затронутыми пользователями, которые ранее сталкивались с той же проблемой.

Вот краткое руководство по сбросу настроек Nintendo Switch:

Если вы по-прежнему сталкиваетесь с тем же кодом ошибки 2110-2003, перейдите к следующему потенциальному исправлению ниже.

Метод 2: перезагрузка или сброс маршрутизатора

Если вы видите код ошибки 2110-2003 на консоли Nintendo Switch, но также сталкиваетесь с аналогичными проблемами с другими устройствами, которые в настоящее время подключены к вашему домашнему маршрутизатору, вы, вероятно, имеете дело с несогласованностью сети.

К счастью, большинство подобных случаев можно решить либо простой перезагрузкой, либо сбросив настройки маршрутизатора до значений по умолчанию.

Если вы решите выполнить простую перезагрузку маршрутизатора, имейте в виду, что эта операция приведет к обновлению вашего IP-адреса и назначенного DNS, который использует ваша консоль. Это не представляет риска потери данных.

Чтобы выполнить перезагрузку маршрутизатора, используйте кнопку ВКЛ / ВЫКЛ на маршрутизаторе (обычно она находится на задней панели). Когда маршрутизатор включен, нажмите на него один раз, чтобы выключить его, затем физически отсоедините кабель питания, чтобы убедиться, что силовые конденсаторы полностью разряжены.

Выключите маршрутизатор Netgear

По прошествии этого периода времени дождитесь восстановления доступа к Интернету, затем попробуйте снова подключить консоль Nintendo к домашнему маршрутизатору и посмотрите, решена ли проблема.

В случае, если та же проблема все еще решена, следующим курсом действий должен быть сброс маршрутизатора. Для этого вам нужно будет использовать специальную кнопку на задней панели.

Примечание: имейте в виду, что большинство производителей делают эту кнопку встроенной, чтобы ее не было случайно. Для доступа к этой кнопке вам понадобится небольшая отвертка или аналогичный предмет.

Но если вы хотите выполнить сброс маршрутизатора, имейте в виду, что эта операция в основном вернет настройки вашего маршрутизатора к значениям по умолчанию. Это означает, что любые пользовательские настройки, которые вы установили в настройках вашего маршрутизатора, будут потеряны – включая перенаправленные порты, элементы из белого списка, заблокированные устройства и т.

Чтобы инициировать сброс маршрутизатора, нажмите и удерживайте кнопку сброса (на задней панели маршрутизатора) и удерживайте ее около 10 секунд или до тех пор, пока не увидите, как все индикаторы на передней панели мигают одновременно. Как только вы заметите такое поведение, отпустите кнопку сброса и подождите, пока соединение не будет восстановлено.

Сбросить ваш маршрутизатор

После завершения этой процедуры повторно установите соединение с Интернетом и посмотрите, завершена ли операция.

Примечание. Если вы используете PPPoE, вам потребуется повторно ввести учетные данные для входа, предоставленные вашим интернет-провайдером.

После восстановления доступа в Интернет попытайтесь подключить консоль Nintendo Switch к Интернету через маршрутизатор и посмотрите, устранен ли код ошибки.

Если вы по-прежнему сталкиваетесь с тем же кодом ошибки 2110-2003, перейдите к следующему потенциальному исправлению ниже.

Метод 3: изменение сетевой безопасности

Ни один из вышеперечисленных методов не сработал для вас, возможно, вы действительно имеете дело с довольно распространенной ошибкой, связанной с тем, как ваша консоль Switch знает, как управлять методом безопасности вашей сети Wi-Fi.

Это постоянная проблема с тех пор, как консоль была выпущена еще в 2017 году, и Nintendo до сих пор не смогла выпустить обновление программного обеспечения, которое устранит эту проблему.

Но хорошая новость в том, что некоторые пользователи нашли обходной путь решения этой проблемы, и его очень легко развернуть. Как оказалось, вы, скорее всего, можете решить эту проблему, зайдя в настройки Интернета на консоли коммутатора и изменив технологию безопасности на что-то другое.

Вот краткое руководство по устранению кода ошибки 2110-2003 путем изменения технологии Wi-Fi по умолчанию в меню настроек Интернета:

Если та же проблема все еще возникает, перейдите к следующему потенциальному исправлению ниже.

Метод 4: переход на Google DNS

Если ни одно из возможных исправлений ниже не помогло, вам следует серьезно подумать о несогласованности DNS (адреса доменного имени). Существует множество отчетов пользователей, подтверждающих, что переключение на диапазон DNS, предоставленный Google, было единственным, что позволило им исправить код ошибки 2110-2003.

Если вы подозреваете, что действительно имеете дело с несогласованностью сети, следуйте приведенным ниже инструкциям, чтобы переключиться на адреса DNS, предоставленные Google:

Fix: Nintendo Switch Error Code 2110-3127

The Nintendo Switch error code ‘2110-3127’ occurs when your Switch cannot connect to a wired or wireless network. Whenever you connect to a network, a series of checks are performed in the background such as checking the DNS, internet connectivity, etc. If any of these are not fulfilled, you will receive the error message.

Nintendo Switch Error Code 2110-3127

Nintendo Switch Error Code 2110-3127

The reasons for the error code ‘2110-3127’ are mostly related to internet connectivity problems where the DNS entered might not be working or the encryption type is not working with the specified wireless network. The full error message includes the messages “Connection test failed. Could not perform DNS name resolution. Please try again later”.

What causes Nintendo Switch Error Code 2110-3127?

Like mentioned, the error code is mostly associated but not limited to connectivity problems. Some of the reasons are:

Before proceeding with the solutions, make sure that you have an active internet connection. You should check the network from other devices such as smartphones or your computer. If you can access the internet normally, it will cross out the possibility of limited connectivity and we can move on with the solutions specific to Nintendo Switch. Also, make sure that you are not using any institution internet. These networks have a firewall that blocks some requests.

Solution 1: Disconnect All Other Devices Using the WiFi

The first step in troubleshooting this particular error should be to disconnect all the devices (a reported solution by many users) that are using the same network as your Nintendo switch except the switch. As this would cut out any issues/interferences raised by these devices. After disconnecting all other devices, restart your router and Nintendo switch and then check if the problem is solved.

Solution 2: Power Cycling Nintendo Switch

The solution which works for a majority of the people was power cycling the Nintendo Switch. As discussed before, there are numerous cases where your Switch might contain bad network configurations. Reconnecting to the network will not erase them, instead, you need to completely power cycle your device.

Solution 3: Manually Entering DNS Settings

Domain Name System is a naming system for all the devices trying to access the internet. Whenever you type ‘google. com’ in the address bar, the name gets ‘resolved’ into an IP address by the DNS and then the internet communication begins. This is more or less the core in connecting devices to the internet. If the DNS is not working automatically, we can try entering it manually and see if the issue is resolved. We will use Google’s DNS.

DNS Settings: Manual

Primary DNS-Server: 8.8.8.8

Secondary DNS-Server: 8.8.4.4

Solution 4: Manipulating Security Settings

Another workaround to fix the issue under discussion is to manipulate the security settings of your network. Several users reported that switching from WPA2-PSK to WPA-PSK and back again solved the issue. This is weird behavior which signifies that there is some bug in the Switch which gets resolved when the configurations are reset.

Solution 5: Use “Guest WiFi”

If going through all the solutions above, nothing has helped you (especially if you are using FIOS Quantum Gateway router), then using the Guest WiFi (not supported by many old routers though) may solve the problem. Keep in mind that a guest Wi-Fi is basically your router’s separate network access point for guests (as the name suggests) whereas your devices are connected to another network access point. The user of a guest network will be able to use the internet but will not be able to access your home network. For illustration purposes, we will discuss instructions for the FIOS Quantum Gateway router. You may follow instructions specific to your router.

Solution 6: Troubleshooting the Network

If the error code 2110-3127 persists even after performing all the above steps, it probably means that there is an issue with the network you are trying to connect. You should try connecting to the internet through the network using another device and verify if it is indeed operational. If it isn’t, you need to do further troubleshooting.

Cisco router configuration page

Cisco router configuration page

You can even try connecting to another network/router with your Switch and see if the issue persists. If it doesn’t, it will mean that there is an issue with your router and you need to reset the settings. There can be issues with your ISP or even Firewalls might be set which might cause the issue. Make sure that you troubleshoot thoroughly and try connecting Switch only when you are sure that your network is working perfectly.

If nothing has worked for you so far, then either update your router’s firmware to the latest build or reset it to its factory defaults.

How to Fix Error Code 2002-4153 on Nintendo Switch

Fix Error Code 2002-4153 on Nintendo Switch

Sometimes it took days for the error to pop up and at times it just pops up every time I play something on my Switch.

It’s frustrating, to say the least, and just like you, I tried to look for a way to fix it.

This guide contains every possible solution to fixing this error code 2002-4153 on Nintendo Switch plus the ones that I personally tried. Personally deleting and redownloading the game worked wonders for me although that lasted not long as the error popped up again.

Each solution is elaborated and written step-by-step so that it’s drop-dead easy for you to follow.

Let’s dive right in. ?

How to Fix Error Code 2002-4153 on Nintendo Switch: 7 Ways

1. Make Sure your Nintendo Switch is Kept Up-To-Date.

It’s important to keep your Switch updated because why not?

There’s tons of great stuff with each Nintendo update and I would say if you were to compare the Switch with other devices, Nintendo actually does a good job in squashing bugs and patching up errors. (I am not affiliated with Nintendo if you’re asking, although that would be pretty sick. 👌)

Note

Most of the time, your Nintendo Switch downloads the most recent Nintendo system update on its own while it is still connected online. So check and verify your current version first for your Nintendo Switch. I’ll show you how next.

Help! How do I check which version my Nintendo Switch is in?

From your Switch’s HOME menu, click on System Settings. Next, scroll down and select System from the left-hand side. Lastly, you can find the version of your Nintendo Switch written underneath System Update.

Here’s how you update your Nintendo Switch:

Step 1: From your Switch’s HOME menu, click on System Settings.

Fix Error Code 2002-4153 on Nintendo Switch

Step 2: Next, scroll down and select System from the left-hand side.

Step 3: Finally, to update your Nintendo Switch, select System Update to start the system update process. It may take a while so hang in there! During the process what it will do is your Switch will perform a check to determine if there is any new system update available to download. If there is an update available, the download will begin.

Fix Error Code 2002-4153 on Nintendo Switch

Help! I can’t perform the system update. It’s not working.

If you find that there is a new version update released by Nintendo but it is not available for you to download, then simply restart your Nintendo Switch and then try again.

Once you’ve updated your Switch you can try once again to go about playing or trying some of the previous software to see if the error has been fixed.

2. Check for Corrupt Data.

Checking for corrupted data is a way we can find out where the root of the problem lies.

Here’s how you do check for corrupt data on Nintendo Switch:

Step 1: Jump into your Switch’s HOME menu and then select System Settings.

Check for Corrupt Data on Nintendo Switch

Step 2: Next, scroll down the list of options on the left and look for the option Data Management. Select Data Management.

Step 3: Now on the right-hand side select Manage Software and then select the most recently used software you used. Try checking the software that gave you the error in the first place to see if it is in any way corrupted.

Step 4: Lastly, just select the Check for Corrupt Data to begin the examining process.

You can provide the information right to Nintendo’s Customer Service for them to help.

You can also try the other methods in this guide to hopefully fix it.

3. The Problem Could Most Likely Be with Your microSD Card.

If the error code 2002-4153 persists on your Nintendo Switch, then it is most likely that the issue could originate from your microSD card (if you’re using one otherwise it is something system-wide which would require assistance from Nintendo)

Note

Please make sure that you back up everything (screenshots, pictures, any data etc.) on the microSD card before you format it. Here’s a great guide on how to back up information from your Nintendo Switch to your microSD card written by Nintendo: How to Back Up Save Data | Nintendo Support

Once you’ve formatted your microSD card, try the microSD once again with your Switch to see if the error is still present.

4. Try using a different microSD card.

Another way to test out whether the error lies with your microSD card is to try another microSD card with your Nintendo Switch.

See if the error persists once again.

5. ReDownload the Problematic Software.

If the error is still not solved, try powering off your Switch and then remove the microSD card.

Proceed to use the Switch like how you normally would.

If you encountered the error while using a game, then delete the problematic software and then re-download it directly to your Switch’s system memory. I’ll show you step-by-step on how to do this next.

Step 1: Jump into your HOME menu and then choose the game that you want to delete (the one that is showing the error code 2002-4153)

Step 2: Next press the + icon on your right Joy-Con stick or icon on your left Joy-Con stick to calling up the game’s options menu.

Step 3: Now select the option Manage Software from the left.

Fix Error Code 2002-4153 on Nintendo Switch

Head’s up!

The next step involves deleting the game. This means it will be uninstalled and removed from your Home screen. This will not delete any game save data. You can pick up where you left off anytime by downloading the game back.

Step 4: Lastly, select Delete Software. You will be asked to confirm, again select Delete.

Delete Software on Nintendo Switch

Step 5: To re-download the game back, simply jump into your eShop from the HOME screen, select the profile which you originally purchased the game.

Step 6: Finally, just select ReDownload from the menu on the left. You need to select the download cloud icon for the game you had deleted.

How to Fix Error Code 2002-4153 on Nintendo Switch

Done! You will see the game appear in your Switch once again. ?

You can try once again to see if this has fixed the error code from popping up.

6. Get in Touch With Nintendo.

You’ve tried everything above and nothing worked.

As a matter of fact, trying these methods allowed us to understand where the problem lies.

We now know our microSD works fine and it is not the cause of the error since we tried every possible way to see if it was corrupted or broken in any way.

We also know that the games and the software are not the problems either.

So the problem has to be that either there’s a worldwide SD card slot failure (which is unlikely) or it could be a bug in the system software.

The best way to proceed with this now is to contact Nintendo’s support and talk to them of the problem you’re having. You can mention the steps you took to try to solve the issue so that they can better understand where the problem lies.

Источники:

https://ddok. ru/kak-ispravit-kod-oshibki-nintendo-switch-2110-2003/

https://appuals. com/fix-nintendo-switch-error-code-2110-3127/

https://www. saintlad. com/fix-error-code-2002-4153-on-nintendo-switch/

Понравилась статья? Поделиться с друзьями:
Добавить комментарий

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: