Fix: Destiny Error Code Bee

The error code Bee is one of the most notorious Destiny error codes and it’s been bugging users for a long time. Bungie’s official statement is that the error code is caused by faulty communication between your modem and the Bungie’s servers but most people claim that their network settings are almost perfect.

Destiny Error Code Bee

The error can be dealt with in a variety of different ways and you never know just what the real solution for your occasion is. That is why we recommend you follow all of the solutions above in order to see just what is the real solution for your Bee error code.

Solution 1: Change the Way Your Are Connecting to the Internet

Most users already know that playing using a wireless connection is unsafe and it can lead to high latency and frequent disconnects. However, some users have reported that sometimes it’s the other way around as they switched from connecting directly into the modem to using Wi-Fi.

This means that the error code can appear either due to a faulty connection with your modem or with your router. If you were using the Ethernet connection, try switching to Wi-Fi and running the game to check if the error code still appears; and vice-versa. Both of these options can help you get rid of the error code Bee for good.

Note: If you are in position, you can also try and replace your router if you have a spare one since some routers don’t allow Destiny to connect properly due to its high range of ports being used.

Solution 2: Restart and Unplug Your Console Completely

This solution has helped quite a few people deal with their Bee error code and this solution is quite a general method for fixing almost all Xbox-related issues. Naturally, this method can only be applied to users playing Destiny on Xbox.

However, make sure all of your games are synced online and backed up since this process may end up deleting them from your local Xbox One memory. There are two ways to delete the cache on Xbox One and reset your console completely:

  1. Press and hold the power button at the front of the Xbox console until it shuts down completely.
  2. Unplug the power brick from the back of the Xbox. Press and hold the power button on the Xbox several times to make sure there is no remaining power and this will actually clean the cache.

  1. Plugin the power brick and wait for the light located on the power brick to change its color from white to orange.
  2. Turn the Xbox back on as you would do normally and check to see if the Tapir error code still appears when you start Destiny or Destiny 2.

Alternative for Xbox One:

  1. Navigate to your Xbox One settings and click on Network >> Advanced Settings.
  2. Scroll down to Alternate Mac Address option and choose the Clear option which appears.

  1. You will be prompted with a choice to really do this as your console will be restarted. Respond affirmatively and your cache should now be cleared. Open Destiny or Destiny 2 after the console has restarted and check to see if the Tapir error code still appears.

If you are using a PlayStation 4 to play Destiny, make sure you follow the instructions below to hard reset your PlayStation 4 since PS4 does not possess an option to clear the cache:

  1. Completely turn off the PlayStation 4.
  2. Once the console is completely shut down, unplug the power cord from the back of the console.

  1. Let the console stay unplugged for at least a couple of minutes.
  2. Plug the power cord back into the PS4 and turn it on the way you normally do.

Solution 3: Port Forwarding

Port forwarding is actually a great fix for these types of issues because of a simple fact that Destiny uses quite odd router ports which are quite high and some routers block these ports by default and some don’t. It’s important to perform these changes quite carefully as you will need to open these ports on your router, if you have the necessary permissions to do so. Follow the instructions below carefully and get rid of your Bee error code:

First of all, we will need to manually assign a static IP address to your console for the router you are currently using and the process is somewhat different from PS4 than it is on Xbox One.

PlayStation 4 Users:

  1. You can try to permanently assign your PS4 to the IP address that it is currently using. To find the IP address, power up your PS4 console.
  2. In the PlayStation 4 main menu select Settings > Network > View Connection Status.

  1. Locate the IP address in the screen which opens up and make sure you write it down somewhere since you will need it to enable port forwarding. Make sure you also write down the MAC address of your PS4.

Xbox One Users:

You can try to permanently assign your Xbox One to the IP address that it is currently using. You can find the current IP address under advanced settings in the Xbox One Dashboard menu. To find the IP address, power up your Xbox One.

  1. Navigate to the home screen and push the menu button on the controller of your Xbox one.
  2. Navigate to Settings > Network > Advanced Settings.

  1. In the IP settings section, you should see the IP address listed. Write down this number because you will need to assign the IP address later.
  2. You should see the Wired MAC address or Wireless MAC address listed under IP settings as well. Write down the 12-digit address for the connection that you are using.

That was the first step where we collected information about the respective consoles. Now we will need to assign static IP addresses to the consoles by following the steps below:

  1. Open a Web browser, type your Default Gateway number (IP address) into the address bar, and press Enter.
  2. Enter your username and password to access your router’s interface. The default username and password should be listed in your router’s documentation, on a sticker on the side of your router, or on the Port Forward website. If the username and password have been changed from the defaults and you don’t remember them, you’ll need to reset your router.

  1. The screen which enables you to add new IP addressed differs from router to router and there are no general rules to this.
  2. First of all, locate the Enable Manual Assignment option and click on the radio button next to Yes. The name of the option may be different or the option may not be present at all.
  3. Locate the window which allows you to type in the MAC address and the IP address of your choice so type in the addresses which you have gathered in the previous steps for your respective console.

  1. After you have done that, click on the Add option and you have now added your console’s IP address to your router.

The last step consists of actually forwarding the ports used by Destiny through your router and via your console in order to get the game running properly again. Again, these settings may differ from router to router but the basis is the same. If you are having problems following these settings, make sure you search for the help page of your router’s manufacturer where these settings may be explained more clearly.

  1. Find the Port Forwarding section while still logged into your router. Each router will be slightly different. Common menu labels for the section of settings that contains Port Forwarding are “Port Forwarding”, “Applications”, “Gaming”, “Firewall”, and “Protected Setup”. If you don’t see one of these or something similar, try “Advanced Settings” and look for a Port Forwarding subsection.

  1. No matter what the router or interface, you’ll need to enter the same basic information. Enter the port you want to open under Internal and External, or enter a range of ports to open under Start and End. Specially, for the Destiny and Destiny 2, there are several ranges you will need to open in your router and they are presented below:
  1. The TCP and UDP abbreviations are the options you should select under the Type of Service Type option. Since you can only select one of the options (or both), repeat these steps several times until you have covered all of the ranges presented above.
  2. Enter the static IP address you created for your console in the steps above and make sure you click on the Enable option if it is available.

  1. Click on the Save or Apply button and make sure you restart both your router and your console in order to fully apply these changes.

Solution 4: Contact Your Internet Provider and Have Your Old Equipment Replaced

It turns out that the problem regarding this error code was caused by people having bad equipment which they used for their Internet connection and they haven’t replaced it in years. In most cases, those people used cable Internet to play the game and it turns out that simply replacing these was able to solve the issue.

If you are a cable Internet user and if you haven’t replaced any of your gear for more than a couple of years, perhaps you should contact a technician from the cable company or simply buy and replace the equipment yourself.

Nonetheless, if you are using any type of Internet connection and you start to notice a drop in performance, make sure you contact your Internet provider and make sure they do everything requested before you check whether the error code keeps appearing.

Quickly and Easily to Fix Destiny 2 Error Code Bee [2021 Update] [Partition Magic]

Destiny 2 error code bee

Have you come across the Destiny 2 error code bee? A large number of users are troubled by this error. If you are trying to figure it out, you come to the right place. This post of MiniTool summarizes many solutions to fix the issue.

Quick Navigation :

Destiny 2 is a fantastic online-only multiplayer shooter video game released by Bungie. You can play this game on Xbox One, PlayStation 4, and Microsoft Windows. Sometimes, however, you may encounter various error codes like Destiny 2 error code Anteater, Destiny crashing, error code weasel, and the one discussed here.

According to the official statement from Bungie, the main reason behind Destiny 2 error code bee is a faulty communication between your modem and Bungie servers. After analyzing several user reports and articles, we summarize the most effective troubleshooting methods as follows.

Fix 1. Restart Your Console and Clear the Cache

As you might know, the files cache of the game is stored in the console’s memory. Once the temporary files become corrupted, it can prevent the game from accessing the Bungie and cause Destiny 2 error code bee. To fix this issue, you can try rebooting the console and deleting the cache.

Step 1. Hold the Power button on the Xbox console until the system is turned off completely.

Step 2. Disconnect the power cable from your console, and then hold the Power button again to release the power. By doing so, it will clear the cache and format the Xbox memory.

Step 3. Reconnect the power cable and wait for the light on console changes from white to orange.

Step 4. Turn your Xbox One on again and see if the Destiny 2 error code bee still persists.

If you encounter the error code bee Destiny 2 when playing the game on PS4, you can hard reset the PS4 to clear the cache. Here’s how to do that:

Step 1. Hold the power button for 7 seconds until you hear the beeps.

Step 2. Unplug all power supply cables.

Step 3. Hold the power button again to discharge the internal power supply.

Step 4. Reconnect the supply cables and start your PS4 normally. Now, you can see if the Destiny error code bee is fixed or not.

ark server not responding thumbnail

A great many users complain about ARK Server not responding. What caused this issue? If you are also trying to figure it out, this post can help you fix it.

Fix 2. Troubleshoot the Internet Connection

The internet connection issue is one of the main causes that lead to Destiny 2 bee error. So, you need to take some measures to troubleshoot network issues. If you are using a wireless internet connection like Wi-Fi or mobile hotspot, we recommend using a wired internet connection to play the game.

In addition, you can follow the tips below to check the internet connection:

  • Check if your router/modem is faulty. To do so, you can run the Internet Connections Troubleshooter or switch to another wireless connection.
  • Contact your ISP provider to diagnose the potential network stability, traffic, and packet loss issue.
  • You can replace the old equipment that you have used for a long time.

After that, you can replay the game and see if error code bee Destiny 2 has been resolved.

Fix 3. Port Forwarding

In order to get better connectivity to Bungie servers, you can port forwarding on your router for Destiny 2. First of all, you need to know which port the Destiny 2 uses.

Destiny 2 for PlayStation 4:

Destiny 2 for Xbox One:

Destiny 2 for Steam:

  • TCP: 27015-27030,27036-27037
  • UDP: 3074,3097,4380,27000-27031,27036

Here we take for PS4 users for example. You can follow this simple guide to port forwarding:

Step 1. Find the IP address and then turn on your PS4 system.

Step 2. Open the Setting menu from the PS4 dashboard, and then navigate to Network > View Connection Status.

View Connection Status PS4

—image from https://www. hkbn. net/

Step 3. Go to the IP Address on the screen and write it down. You need to use this PS4 IP address to enable port forwarding. Besides, you need to write down the MAC address of your PS4.

Step 4. Now, you can use the IP address that you just found on PS4 to port forwarding.

ABOUT THE AUTHOR

Position: Columnist

Ariel is an enthusiastic IT columnist focusing on partition management, data recovery, and Windows issues. She has helped users fix various problems like PS4 corrupted disk, unexpected store exception error, the green screen of death error, etc. If you are searching for methods to optimize your storage device and restore lost data from different storage devices, then Ariel can provide reliable solutions for these issues.

How to Fix Destiny 2 Error Code Bee – 2019 Tips

Fix Destiny 2 Error Code Bee

Error code Bee is one of the many problems that Destiny 2 players are facing these days. Apart from the Weasel error code, this error code Bee is one of the most notorious error codes that is bugging users. From what Bungie has reported, the error is due to the poor connection between the user’s modem and Bungie’s servers. Many users say that their connection is well and perfect, so who is to blame?

Fix Error Code Bee in Destiny 2

If you are one of those unlucky people who are facing this error, you can get rid of it in a few steps. Handling this error is easy, but you will have to do some work for it. We have gathered all the fixes that can help you get rid of this error in no time. Read them below and try them as soon as possible.

Fix 01 – Change the way you are connecting to the internet

The Destiny 2 error code Bee might be due to your internet connection. Many of us know that a faulty wireless connection can cause frequent disconnections. But many people suggest the other way. Connecting your device directly to the Wi-Fi can also cause this error.

If you are using an Ethernet connection and the error appears, it might be due to a fault in the modem or router. Try switching to the Wi-Fi connection and see if the error vanishes or not.

Fix 02 – Restart and unplug your console completely

This solution is only for those users who play Destiny 2 on Xbox One. Restarting and unplugging console is the general solution for all Xbox-related issues, so check if it resolves error code Bee problem. Don’t forget to sync your game online or back it up as you might end up losing all your data.

  1. Press the power button on the Xbox console and keep pressing it until the device completely shuts down.
  2. Disconnect the power brick from the back of the Xbox. Click on the power button at the front and hold it for a few seconds, repeat the process few times until there is no power in the Xbox.
  3. Now, connect the power brick again and wait until the light beside it turns from white to orange.
  4. Turn on the Xbox, start your game, and see if the error still appears or not.

In case you are playing the game on your PlayStation 4, follow these steps.

  1. Unplug the power cord from the back of the device wait until it is completely shut down.
  2. Keep the console unplugged for few minutes.
  3. Plug it back again and launch the game to see if the error exists.

Fix 03 – Port Forwarding

Port forwarding is one of the best ways to solve such problems as Destiny uses high router ports. Often, these ports are blocked by the routers by default, while some ports don’t do it. Try this fix to get rid of this code pretty quickly and without any trouble.

First, assign a static IP address to your console. Here is the whole process for PlayStation 4 users:

  1. Either assign the IP address permanently to your console or power up your console to search for the IP address.
  2. Go to the main menu. Click on Settings > Network > View Connection Status.
  3. Locate the IP address and write it down somewhere since you will need it for port forwarding. Write down the PS4 MAC address as well.

Here is how Xbox One users do port forwarding on their console:

You can either assign the current IP address permanently to your device or power up your console to find the IP address. This process will be similar to what was followed in the PS4; however, once you are in the network screen, click on the Advanced Settings for IP selection.

After doing this, now is the time to assign static IP addresses to the consoles. Follow these steps:

  1. In the web browser, type the address bar of the IP address and click Enter.
  2. Enter your username and password to access your router interface.
  3. The screen to enter the IP address might be different for every other router. Search for the Enable Manual Assignment option, then click on the radio button next to Yes.
  4. Search for the window where you can enter your selected IP and MAC address.
  5. Press the Add option and add the IP address in it that you have just entered your router.

Now, it’s time to forward the ports through your console and router to Destiny so the game starts working again. Here’s how you can do it:

  1. Search for port forwarding while staying logged in to your router. Look for “Applications,” “Port Forwarding,” “Protected Setup,” “Gaming,” “Advanced Settings,” or “Firewall,” as every router’s settings can be different.
  2. Open the ports under Internal and External or open a range of ports under Start and End.
  3. Select TCP and UDP for the Service Type Option. Continue the process until the whole range of ports is covered.
  4. Enter the static IP address and Enable it
  5. Press Save Application and restart your router.

Fix 04 – Replace your old equipment by contacting your Internet Provider

If you have old internet equipment, then this might be an issue behind error code Bee. You can easily get rid of it by replacing your old equipment by contacting your internet provider. Try changing your internet cable, or merely replacing the router may solve the problem for you.

Hopefully, one of these fixes will work for you, helping you get rid of the Bungie error code Bee or Destiny 2 connection issues. If you have any questions, then feel free to ask in the comments below.

Источники:

https://appuals. com/fix-destiny-error-code-bee/

https://www. partitionwizard. com/partitionmagic/destiny-2-error-code-bee. html

https://digiworthy. com/2019/12/24/fix-destiny-2-error-code-bee/

Понравилась статья? Поделиться с друзьями:
Добавить комментарий

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: