Fix: Destiny Error Code Anteater

There are quite a few error codes that might appear to you if you are playing Destiny on your respective console. However, dealing with these error codes can sometimes be quite difficult since Bungie has not yet released a regular fix for either of these issues, and users are forced to think them through themselves.

The error code Anteater is usually accompanied by several other error codes including Bee, Baboon, etc. However, users have not had much luck fixing the error code until certain fixes from Bungie arrived which solved the problem temporarily. Long term speaking, the error still affects users so make sure you try and fix it by following the steps below:

Solution 1: Switch to a Wired Internet Connection

It’s recommended that you try to switch to a wired Internet connection if you are using WiFi or a mobile data connection to play and check to see if the issue still occurs. Users who have played the game over WiFi have reported that the error almost disappeared after they switched to a wired connection so make sure to try this solution out before you start doing anything else.

Solution 2: Restart Your Console

This solution has helped quite a few people deal with their Anteater error code and this solution is quite a general method for fixing almost all Xbox-related issues. Naturally, this method can only be applied to users playing Destiny on Xbox.

However, make sure all of your games are synced online and backed up since this process may end up deleting them from your local Xbox One memory. There are two ways to delete the cache on Xbox One and reset your console completely:

Alternative for Xbox One:

If you are using a PlayStation 4 to play Destiny, make sure you follow the instructions below to hard reset your PlayStation 4 since PS4 does not possess an option to clear the cache:

Solution 3: Contact Your Internet Provider

It turns out that the problem regarding this error code was caused by people having bad equipment which they used for their Internet connection and they haven’t replaced it in years. In most cases, those people used cable Internet to play the game and it turns out that simply replacing these was able to solve the issue.

If you are a cable Internet user and if you haven’t replaced any of your gear for more than a couple of years, perhaps you should contact a technician from the cable company or simply buy and replace the equipment yourself.

Nonetheless, if you are using any type of Internet connection and you start to notice a drop in performance, make sure you contact your Internet provider and make sure they do everything requested before you check whether the error code keeps appearing.

How to Fix Destiny 2 Error Code Anteater (2021 Update) [Partition Magic]

Have you ever encountered Destiny 2 Anteater error? This post from MiniTool will show you how to fix Destiny 2 error code Anteater. If you get the same error, you can check out this post for effective solutions now.

Quick Navigation :

Destiny 2 is a free-to-play online-only multiplayer first-person shooter video game developed by Bungie. It is available on PlayStation 4, Xbox One and Microsoft Window. Recently, many users reported they got the error code Anteater on Destiny 2.

How to fix it? After analyzing several posts on how to fix Destiny 2 error code Anteater, here I have summarized some top solutions to remove the error. If you don’t know how to remove error code Anteater on Destiny 2, try the following solutions one by one.

Solution 1. Use a Wired Internet Connection

The Destiny 2 Anteater error usually indicates that there is a network error occurred. If you are using WiFi or a mobile data connection, it is recommended that you try using a wired Internet connection. Some users who played the game via WiFi connection reported that after switching to a wired connection, the error code Anteater disappeared.

So, you can try this solution first and check to see if this fixes Destiny 2 error code Anteater.

Most people use network to access the Internet every day. However, most of them have no idea about modem vs router. Now, you can get the answer from the post.

Solution 2. Contact Internet Service Provider

As mentioned before, the Destiny 2 Anteater error can be caused by the problem with ISP (Internet Service Provider). So when you get the Anteater error code, it’s always a good idea to contact them and find out what’s wrong. You can ask your ISP to run a test to check the connection speed.

If there is no connection problem from the Internet service provider side, you may need to consider other reasons such as a faulty cable.

If you are one of the Destiny players who are struggling with error code weasel, don’t worry. This post has summarized some top solutions for you.

Solution 3. Clear Cache on Your Console

If you get Destiny 2 error Anteater on your Xbox One or PS4 console, you can try clearing the cache. Faulty cache memory can give rise to Destiny 2 Anteater error.

Many users reported that after rebooting and clearing the cache on their game console, they fixed the Destiny 2 Anteater error.

If you want to have a try, here are detailed steps:

For Xbox One:

Step 1. Press and hold the power button of the Xbox one console until the console shuts down completely.

Step 2. Remove the power cord from the Xbox and press the power button a few more times to drain the remaining power. This is to clear the cache memory.

Step 3. Plug-in the power cable to the Xbox One console and restart the Xbox one.

For Play Station 4:

Step 1. Turn off the PS4 console completely and remove the power cord.

Step 2. Wait for a few minutes. And then insert the power cord again.

Step 3. Reboot the PS4 and check to see if the Destiny 2 Anteater error disappears on the gaming console.

However, if the issue persists after rebooting and clearing cache on your device, try installing the latest system and game updates.

Conclusion

How to fix error code Anteater Destiny 2? After reading this post, now you should know how to fix Destiny 2 error code Anteater. Which method works for you? Do you have any better solution? We are glad to have you share it with us.

FIX – Destiny 2 Error Code Anteater

Similar to most errors that occur while playing Destiny 2 such as the error code weasel and buffalo, the Destiny 2 error code anteater is also due to a faulty connection between the server and the host.

According to Bungie, these errors are caused due to circumstances unassociated with the Bungie server such as the result of a problem with ISP, network hardware compliance issues, packet lost while playing the game, unstable connections, and Wi-Fi glitches.

Hence, the fault most likely is with your device and network. Making some small changes and configuration adjustments can get you back in the game.

Here is a list of solutions to fix Destiny 2 error anteater.

Solution 1: Stop Using the Hotspot or Wi-Fi Connection

Any game that requires you to transfer packets of data should be played over a wired connection. If you are using a Wi-Fi or hotspot connection to play Destiny 2, we highly recommend that you switch to a wired connection. A large number of errors that occur in Destiny 2 are due to interruption in connection and the Wi-Fi is the primary culprit. If you are serious about gaming and don’t want errors whether it’s for Destiny 2, COD, or any other game, a wired connection is a must.

Many users who faced the error code were able to connect with the game and play it seamlessly once they shifted from Wi-Fi or hotspot connection to a wired internet connection. Try this as the first step for any error you encounter with the game.

Solution 2: Clear Cache

Another proved method to resolve the Anteater error code is clearing the cache, this method does not just fix this particular error but any other problem you might be facing with the game. However, it’s only for Xbox users, so naturally, people playing on PC or PlayStation can skip through this solution.

A word of caution though, before you proceed with this method, ensure the game is synced online and you have backed up the game as most of the data will be deleted from your local system memory – the Xbox memory.

There are two ways to delete the cache from the Xbox and reset the memory.

Manual Reset

Resetting Cache through Settings

Solution 3: Hard Reset PlayStation

Like Xbox, there is no option to clear the cache in PlayStation; however, hard resetting the PlayStation performs the same function. PlayStation users try this method to fix the error code.

Solution 4: Contact Internet Service Provider

As Bungie recommend that the error can be caused due to problem with the ISP, it’s always a good idea to give them a call. Many times a particular game or website might be problematic and the problem is with the Internet Service Provider. Request the ISP to run tests to check you connection speed. Sometimes lowering the ping can also eliminate this error. Make sure that everything is fine from the ISP end.

Solution 5: Replace Internet Cables and Equipment

More often than not, the problem is with old internet cables or equipment. If you have not changed the internet cable and other network equipment in years, it might be time you do so. Even if you have a new cable installed, having a spare for test purposes is recommended. Even a new cable can be faulty so check the cable and other equipment for fault. A lot of users simply have a defective or leaking cable that’s causing the Destiny 2 error code anteater as it disconnects just a fraction of the second but enough to cause packet lapse and the error.

Solution 6: Check Firewall

For PC users, the Firewall is a great antimalware software integrated in the OS to defend your system against malicious software, but often it’s the cause of most problems. Sometimes, the error can also be caused as the Windows Firewall is blocking Destiny 2. There is two things you can try, one a little less risky than the other. Try adding Destiny 2 to the Windows exception list. You can follow the same steps we have highlighted in this blog to add Chrome to the exception list of Windows Firewall.

The other method is to simply turn off the Windows Defender and try playing the game. If it works, the problem is with the Windows Defender.

If Windows Defender is causing the Destiny 2 error code Anteater, then you must add the game in the exception list of Windows Defender because turning off the Defender is not a long-term fix as it may put your system under risk.

If the issue is still not fixed, you might have some files missing from the game and a reinstallation of the game can fix the problem. There are various software available online that can scan your repository for corrupt and missing file, try one of these software such as Reimage Repair Tool. We do not specifically recommend this particular software, it’s just a suggestion! You can find a better alternative.